7282-7029-40

Terminals and seals are included

The Component: Aftermarket 7282-7029-40. 2-Way male sealed automotive connector housing with integrated mounting clip track (Dark Grey / Neutral).

Series Taxonomy: Yazaki 2.3mm (090 II) Sealed Series. A foundational, high-performance Japanese automotive interconnect ecosystem deployed extensively for robust low-voltage powertrain and sensor monitoring links.

Terminal Interface: 2-pin single-row inline cavity layout configured to accept 2.3mm (090 size) male blade tabs, supporting multi-gauge wire crimps from 0.30mm2 to 2.00mm2.

Locking and Sealing Security: Environmentally sealed to an IP67 rating with a continuous operating threshold certified from -40 to +120 degrees Celsius. Internal terminal positioning is reinforced by a secondary Terminal Position Assurance (TPA) locking lock to prevent pin back-out under strain. Mating retention relies on a top mechanical latch channel, while the housing exterior features an integrated chassis mounting slide track designed to snap securely onto a 7x12mm panel bracket hole.

Mating Complement: Connects inline wire-to-wire by mating directly onto the corresponding 2-way female counterpart socket housing under Yazaki part number 7283-7029-40 (cross-references with Toyota part number 90980-11069).

Common Applications: Extensively specified across prominent Japanese motorcycle and passenger vehicle wiring networks, including Toyota, Lexus, Suzuki, and Mitsubishi. Most prominently deployed as the primary harness-side repair interface for camshaft position sensors (such as classic Suzuki GSX-R and Hayabusa sportbike setups), vehicle speed sensors (VSS), and under-hood ambient temperature telemetry lines. Highly prone to localized chassis clip breakage, track wear, or locking latch deformation if serviced without releasing hidden bracket tangs.

Yazaki style 7282-7029-40 090 II Series 2-Way Sealed Male Camshaft and Speed Sensor Plug Housing

Eliminate intermittent sensor dropouts, clear persistent check engine codes, and re-establish premium weatherproofing insulation inside your vehicle's engine management harness with the genuine Yazaki 7282-7029-40 2-way male sealed connector plug housing. Precision-engineered to strict Tier-1 original equipment automotive standards by Yazaki, this 2-pin 2.3mm male interconnect block is a foundational piece for executing durable wire-to-wire repairs. Designed with a robust single-row cavity block built around a 2.3mm male tab width, it provides a stable, zero-resistance electrical transition path capable of safely managing continuous current circuits up to 10A without risking resistance scaling.

The 7282-7029-40 housing is injection-molded from premium-grade, heat-stabilized Polybutylene Terephthalate (PBT) finished in a dark grey neutral tone, guaranteeing exceptional impact resistance, high dimensional accuracy, and complete immunity to structural fatigue across hostile engine environments. Working in unison with individual rear-wire silicone seals and its internal perimeter gasket, it blocks out aggressive oil vapor, moisture tracking, road salt spray, and abrasive dirt. The distinct exterior profile includes an integrated, built-in chassis mounting slider track tailored for standard 0.6mm to 1.4mm panel thicknesses, ensuring the connector can be anchored away from moving powertrain belts or hot exhaust manifolds. This authentic component allows auto-electrical trade specialists, fleet workshops, and motorcycle tuning garages to complete traceable, factory-correct wiring restorations.

Engineering Specifications and Technical Attributes:

- Manufacturer Part Number: 7282-7029-40 (Brand: Neutral)

- Configuration: 2-Way Male Tab Housing, Single-Row Inline Contact Matrix

- Product Series Taxonomy: 2.3mm (090 II) Environmentally Sealed Class

- Mating Interface Dimension: Accepts 2.30mm width male flat blade tabs

- Maximum Nominal Current Capacity: Continuous 10 Amperes (Amps) reference ceiling

- Locking Security: Integrated secondary TPA lock with outer latch receiver channel

- Mounting Adaptation: Built-in slide chassis clip track for 7mm x 12mm panel brackets

- Structural Molding Material: Premium High-Stability Polybutylene Terephthalate (PBT)

- Primary Structural Companion: Mates directly with female socket block part number 7283-7029-40

- Commercial Access: Tiered B2B wholesale trade volume pricing breaks apply instantly inside your basket for independent tuning garages, fleet service hubs, and trade auto-electrical stockists.

We ship Worldwide daily and you can buy online safely using PayPal

We are the UK's largest specialist stockist of Automotive Connectors, and we offer low cost shipping to all Countries, fast and safe.