Original Yazaki 7282-7020-10

Terminals and seals are included

The Component: Genuine Yazaki 7282-7020-10. 2-Way male automotive housing cap assembly for male tab terminals (Dark Gray).

Series Taxonomy: Yazaki 2.3II (090II) Sealed Series. A legendary, ultra-rugged Japanese automotive interconnect platform engineered by Yazaki to deliver flawless weatherproof signal transmission and low-voltage power circuit routing across extreme powertrain environments.

Terminal Interface: 2-pin single-row inline cavity layout featuring a robust centerline pitch spacing, configured explicitly to house 2.3mm (090 size) wide male flat blade tab terminals.

Locking and Sealing Security: Environmentally sealed to an IP67 rating to preserve circuit defense across a continuous operational temperature threshold certified from -40 to +120 degrees Celsius. Relies on a high-integrity double terminal locking architecture utilizing internal housing lances backed by a dedicated front holder track to ensure absolute Terminal Position Assurance (TPA) and prevent pin back-out under severe axial wire pull.

Mating Complement: Connects wire-to-wire by mating directly onto the corresponding 2-way female plug socket housing under Yazaki part number 7283-7020-10 (which cross-references directly to Toyota OEM part number 90980-10899).

Common Applications: Extensively specified across prominent Japanese and global vehicle networks, most notably within Toyota, Lexus, Subaru, and Nissan factory platforms. Frequently deployed as the primary, high-exposure harness interface for under-hood sensor modules, variable valve timing (VVT) solenoids, windshield washer pumps, and exterior ambient temperature sensors. Highly vulnerable to exterior alignment slot wear, latch fracturing, or lock arm degradation if subjected to brittle engine bay heat cycles over extended periods.

Yazaki 7282-7020-10 2.3II (090II) Series 2-Way Sealed Male Tab Cap Housing

Restore flawless circuit communication, eliminate intermittent sensor dropouts, and reinstate premium factory-correct environmental insulation inside your vehicle's harness loom with the genuine Yazaki 7282-7020-10 2-way male sealed connector housing. Precision-manufactured to strict Tier-1 original equipment global automotive standards by Yazaki, this 2-pin inline cap block is an industry staple for executing professional wire-to-wire automotive harness overhauls. Designed with a rugged single-row cavity matrix optimized explicitly around the 2.3II (090II) terminal footprint, it provides a highly stable, low-resistance connection path that safely manages nominal current loads up to 10A without risking localized resistance spikes.

The 7282-7020-10 carrier housing is injection-molded from a premium Polybutylene Terephthalate (PBT) compound finished in a factory dark gray tone, guaranteeing exceptional impact defense, outstanding dimensional tracking accuracy, and complete immunity to chemical degradation from engine oils, fuel vapors, and road salt spray. Working in absolute uniformity with internal silicone perimeter compression seals and individual wire seals (such as 7157-3646), it completely locks out road moisture, ambient grime, and abrasive debris from invading the internal contact lanes. Precision-molded polarization paths ensure immediate, flawless alignment with its matching 7283-7020-10 female socket plug. This authentic replacement component allows independent auto-electrical specialists, trade diagnostics garages, and custom loom builders to deliver zero-resistance, professional factory restorations.

Engineering Specifications and Technical Attributes:

- Manufacturer Part Number: 7282-7020-10 (Brand: Yazaki / Japan)

- Configuration: 2-Way Cap Housing for Male Terminals, Single-Row Inline Matrix

- Product Series Taxonomy: 2.3II (090II) Environmentally Sealed Class

- Mating Terminal Footprint: Accepts 2.3mm (090) wide flat male blade tab contacts (e.g., 7114-4025, 7114-4026)

- Sealing Classification: High-Performance Waterproof / Dustproof Weatherproof Protection

- Operating Temperature Envelope: Robust -40 to +120 degrees Celsius capability

- Double Locking Feature: Integrated housing lances paired with front-loading terminal retainer block

- Primary Toyota OEM Interconnect Cross-Reference: Fits Toyota 90980-10899 Female Interface

- Primary Structural Companion: Mates directly with female socket block part number 7283-7020-10

- Commercial Access: Tiered B2B wholesale trade volume pricing breaks apply instantly inside your basket for independent tuning garages, fleet service hubs, and trade auto-electrical stockists.

Family 2.3II (090II) Connectors

Type -

Yazaki Part Number 7282-7020-10

Connection Type Wire to Wire

Unsealed/Seald Sealed

Male/Female Male

Number of Poles 2

Tab Width mm(inches) 2.3(090)

Material PBT

Plating -

Color Dark Gray

Rating -

Mating Part Numbers 7283-7020-10

We ship Worldwide daily and you can buy online safely using PayPal

We are the UK's largest specialist stockist of Automotive Connectors, and we offer low cost shipping to all Countries, fast and safe.

7282-7020-10 90980-10898