Original Sumitomo 6188-0175

6 Way Automotive Connector includes terminals and seals

The Component: Genuine Sumitomo 6188-0175 TS / MT Sealed Series 6-Way male automotive connector housing (Grey).

Series Taxonomy: Sumitomo TS / MT Sealed Series. An exceptionally reliable Japanese automotive interconnect platform specified widely across critical engine-bay networks for advanced weatherproofing and resistance to intense vibrational harmonics.

Terminal Interface: 6-pin dual-row cavity configuration designed to accept 2.3mm (090 size) male blade tabs, accommodating standard automotive wiring cross-sections.

Locking and Sealing Security: Environmentally sealed to an IP67 rating with a continuous operating temperature threshold certified from -40 to +120 degrees Celsius. Internal terminal seating is fortified by an integrated secondary hinge lock retainer to prevent pin back-out. Features a secure outer mechanical locking latch that snaps audibly over the mating female plug interface.

Mating Complement: Connects inline wire-to-wire or wire-to-device by mating directly onto the corresponding 6-way female counterpart plug housing under Sumitomo part number 6189-0323 (cross-references directly with Toyota part number 90980-11663).

Common Applications: Heavily specified as a premium factory wire-harness repair pigtail across major Japanese passenger car and commercial networks, particularly Toyota and Lexus platforms under OEM cross-reference part number 90980-11193. Most frequently deployed as the primary electrical interface for Accelerator Pedal Position Sensors (APPS), drive-by-wire electronic throttle pedals, and exterior lighting sub-assemblies. Highly prone to clip fracture or terminal contamination during routine interior footwell maintenance or engine bay overhauls.

Sumitomo 6188-0175 TS/MT 2.3mm Series 6-Way Sealed Male Accelerator Pedal and Throttle Plug Housing

Re-establish flawless low-voltage signaling, eliminate intermittent throttle pedal fault codes, and restore absolute environmental insulation inside your vehicle's wiring loom with the genuine Sumitomo 6188-0175 6-way male sealed automotive connector housing. Precision-engineered to strict Tier-1 original equipment automotive engineering guidelines by Sumitomo Wiring Systems, this 6-pin 2.3mm male interconnect block is a foundational component for executing high-integrity auto-electrical restorations. Designed with a clean dual-row cavity matrix optimized for 090-size male blade tabs, it establishes a solid, zero-resistance connection path that safely manages low-voltage sensor telemetry without risking resistance spikes.

The 6188-0175 carrier block is injection-molded from premium, chemically stable Polybutylene Terephthalate (PBT) plastic finished in a factory grey tone, ensuring outstanding impact resistance, high dimensional accuracy, and absolute resistance to structural fatigue under demanding under-hood or cabin floor conditions. Working in absolute uniformity with individual silicone rear-wire cable seals and a matching internal compression gasket, it builds a tight barrier that completely isolates electronic signal lines from moisture tracking, heavy road grime, and dust. The heavy-duty top mechanical latch ensures positive retention, locking the mating halves solidly together against high-frequency chassis vibrations. This authentic component allows auto-electrical trade specialists, diagnostic engineers, and performance tuning garages to complete clean, factory-standard harness repairs.

Engineering Specifications and Technical Attributes:

- Manufacturer Part Number: 6188-0175 (Brand: Sumitomo Wiring Systems / Japan)

- Configuration: 6-Way Male Tab Housing, Dual-Row Inline Contact Matrix

- Product Series Taxonomy: TS / MT 2.3mm (090) Environmentally Sealed Class

- Mating Interface Dimension: Accommodates 2.30mm width male flat blade tabs

- Locking Security: Integrated secondary hinge lock retainer with outer mechanical latch arm

- Sealing Classification: Waterproof / Dustproof Weatherproof Environmental Shielding

- Toyota OEM Alternate Part Number Cross-Reference: 90980-11193

- Primary Structural Companion: Mates directly with female socket housing part number 6189-0323 (Toyota 90980-11663)

- Commercial Access: Tiered B2B wholesale trade volume pricing breaks apply instantly inside your basket for independent tuning garages, fleet service hubs, and trade auto-electrical stockists.

TS sealed series

Housing Inline

2.3mm (090)

Sealed/Unsealed sealed

Male/Female M

Way 6

Mating parts 6189-0323 (TS sealed series)

Materials PBT

Color Grey

We ship Worldwide daily and you can buy online safely using PayPal

We are the UK's largest specialist stockist of Automotive Connectors, and we offer low cost shipping to all Countries, fast and safe.