TE Connectivity 184010-1 2-Way Female Sealed SSC Connector

The Component: Genuine TE Connectivity / AMP high-performance sealed female socket connector plug housing. Sealed Sensor Connector (SSC) System Series taxonomy / 2-position single-row linear female casing / Code A Keying Profile (Solid Black / PBT GF15 / Sealed / 1x2 Grid Configuration / Female Inline Interface Plug / Component Alias Code: 184010-1 / Global Order Reference: 184010-1).

Applications & Fitment: Engineered as an industrial-grade, factory original equipment (OE) wire-to-wire or wire-to-device waterproof connection plug designed to ensure seamless circuit isolation within demanding, high-exposure automotive zones. This 2-pin female sensor socket block is a massive wiring harness staple across modern global automotive, marine engine, and motorcycle electronics—most notably serving as a critical connection link for engine sensors and exterior lighting. It encounters widespread deployment within Ford platform configurations (frequently cross-referencing to factory service pigtail kits 3U2Z-14S411-NUA / WPT-454 or 3U2Z-14S411-JZA / WPT-674) to process high-reliability sensor outputs under intense mechanical stress. Built to withstand continuous high-frequency engine vibration, oil film exposure, and severe road spray, it preserves complete signal path continuity for fuel injectors, fluid temperature sensors, knock sensors, and individual ABS wheel speed links. Highly vulnerable to top thumb-latch lever fractures or tracking slot distortion if field service mechanics attempt forced separations using generic, un-profiled hand tools during routine diagnostic maintenance.

Technical Attributes:

- Manufacturer Part Number: 184010-1 (Brand: TE Connectivity / AMP Brand Automotive Interconnect)

- Product Series Taxonomy: Sealed Sensor Connector (SSC) System Family

- System Mechanical Keying: Code A Specification (Color-coded Solid Black Body Matrix)

- Configuration: 2-Position / 2-Way Female Socket Plug, Single-Row 1x2 Straight Inline Layout

- Centerline Lead Pitch: 5.00mm structural spacing gap

- Cable Exit Trajectory: 184010-1 incorporates a clean 180-degree straight rear wire path exit alignment

- Connector Style: Socket Housing for Female Receptacles (Free-Hanging Inline or Device Plug Shroud)

- Fastening & Locking Architecture: Features a heavy-duty integrated top-mounted mechanical latching arm that locks securely onto mating male tabs

- Secondary Locking System: Equipped with a pre-assembled high-visibility yellow front-loading terminal position assurance (TPA) alignment plate to ensure zero contact back-out

- Mating Terminal Tab Envelope: Custom-engineered to shield standard 1.8mm nominal tab width terminal configurations

- Base Structural Compound: Premium Polybutylene Terephthalate Glass Filled (PBT GF) engineering polymer for supreme structural stability, oil resistance, and impact toughness

- Environmental Sealing Level: High-performance waterproof and dustproof isolation utilizing a robust internal perimeter silicone face seal and isolated single wire entries

- Low-Voltage Circuit Threshold: Nominal architecture engineered to safely handle low-voltage automotive networks up to a maximum rating of 125 VDC / VAC continuous

- Continuous Current Threshold: Field-certified to carry continuous electrical current loads up to a maximum 17.0 Amps depending on conductor diameter

- Operational Thermal Window: Severe-duty engine compartment envelope certified to maintain structural elasticity from -40°C up to +125°C

- Target Female Terminal Contacts (Not Included): Precision optimized to accept standard TE SSC series 1.8mm female receptacle crimp sockets (such as the 184030 series for 22-14 AWG lines)

- Associated Wire Sealing Grommets (Not Included): Requires individual single-wire silicone rubber cavity seals (such as the 184139-1 series) matched to target wire insulation outer diameters to maintain IP-rated sealing

- Mating Counterpart Interface: Pairs seamlessly inline as the direct female partner to matching 2-way male TE Connectivity cap housings (such as part number 184012-1) or sealed device headers

- Commercial Access: Available as loose individual housing shells, or comprehensive multi-piece trade repair kits complete with terminals and seals. Tiered B2B wholesale trade volume pricing breaks apply instantly inside your basket for independent garages, loom remanufacturers, and trade auto-electrical stockists.