Sumitomo 6195-0012 3pin 090 DL Sealed Male Plug

Includes terminals and seals

The Component: Genuine Sumitomo 6195-0012 3-way male automotive sealed connector housing. DL Sealed Series 090 (2.3mm) 3-position male tab casing (Dark Gray / PA6T / Single-Wire Sealed / Loose Piece).

Series Taxonomy: Sumitomo DL Sealed Series System. A high-performance Japanese automotive environmental interconnect platform engineered by Sumitomo Wiring Systems. Developed to provide total weatherproofing, exceptionally low initial contact resistance (3 mΩ Max), and robust logic signaling or ignition current delivery across high-stress engine management layouts subject to extreme under-hood thermal cycles and continuous chassis vibration.

Connector Interface: 3-position (3-way) single-row inline male tab configuration featuring a 2.3mm (.090 size) flat blade terminal alignment matrix, explicitly designed to hold standard Sumitomo DL series male flat pin contacts.

Locking and Sealing Security: Environmentally sealed to an IP67 waterproof and dustproof automotive classification, engineered to operate continuously within a demanding engine bay thermal window. Utilizing an internal high-performance silicone seal configuration combined with matching rear individual single-wire rubber insulation cavity seals (SWS) to form an absolute water-tight barrier against oil tracking, moisture ingress, and dirt. Built with a premium Polyphthalamide (PA6T) engineering resin profile that offers an initial insulation resistance of 100 MΩ Min and an exceptional structural defense ceiling against continuous automotive operational vibration.

Mating Complement: Connects inline wire-to-wire or wire-to-component by clicking directly into its corresponding 3-way female inline socket partner plug variant under Sumitomo part number 6195-0009, or matching integrated device socket shrouds.

Common Applications: Extensively specified as a factory original equipment (OE) mainstay across prominent Japanese passenger car networks and tuner platforms, most notably within Mazda, Nissan, and mitsubishi architectures. Universally recognized across the auto-electrical trade as the definitive engine-side wiring harness repair pigtail for ignition coilpacks (frequently utilized across Mazda MX-5 Miata NA and NB engine rebuilds, Mazda RX-8 ignition configurations, and early Nissan performance platforms). Also deployed widely as a 3-pin interface for camshaft sensors, crankshaft position sensors, and various low-voltage powertrain telemetry links. Highly vulnerable to exterior locking hinge fatigue, plastic latch snapping from age-related engine heat-soak embrittlement, or casing deformation if forced open carelessly during spark plug swaps or ignition system diagnostics.

Sumitomo 6195-0012 DL Sealed Series 3-Way Male Ignition Coilpack & Sensor Plug Housing

Resolve persistent engine misfires, eliminate erratic ignition telemetry dropouts, and reinstate maximum factory-standard environmental insulation at your ignition rail or sensor layout with the genuine Sumitomo 6195-0012 3-way male sealed connector housing. Precision-manufactured to strict Tier-1 original equipment global automotive engineering parameters by Sumitomo, this 3-pin DL series 090 male tab carrier block is an indispensable trade component for executing professional ignition loom restorations, custom motorsport wire tucks, and clean auto-electrical pigtail fabrications. Engineered explicitly to survive punishing dynamic forces directly on the cylinder head and transmission block, it maintains a rock-solid electrical connection with an initial contact resistance capped strictly at a maximum of 3 mΩ.

The 6195-0012 carrier housing features an ultra-stable 3-pole inline cavity matrix optimized around the 2.3mm (.090) male tab terminal footprint, cleanly handling thin-wall automotive cabling cross-sections from 0.30mm² up to 2.00mm² cleanly depending on your chosen terminal setup. The housing body is injection-molded from a premium, heat-stabilized Polyphthalamide (PA6T) compound finished in a factory dark gray profile, ensuring outstanding structural impact defense, superior low water absorption tracking properties, and absolute immunity to chemical degradation from hot engine oils, fuel vapors, and environmental salt spray. This authentic replacement component allows independent tuning garages, auto-electrical trade specialists, and JDM engine restoration builders to deliver reliable, zero-resistance factory harness overhauls.

Engineering Specifications and Technical Attributes:

- Manufacturer Part Number: 6195-0012 (Brand: Sumitomo / Japan)

- Configuration: 3-Way Male Tab Housing, Single-Row Inline Layout

- Product Series Taxonomy: DL Sealed Series / 090 (2.3mm) Mating Class Management

- Mating Terminal Size Footprint: 2.3mm (.090 inch standard flat blade automotive pin profile)

- Number of Cavities/Positions: 3 Pins inline

- Component Color Profile: Factory Dark Gray

- Base Structural Compound: High-Grade, Low Water Absorption PA6T Engineering Polymer

- Contact Resistance Window: Initial: 3 mΩ Max | After Durability Testing: 10 mΩ Max

- Insulation Resistance Capability: 100 MΩ Minimum threshold

- System Sealing Profile: Waterproof / Dustproof High-Performance Environmental Shielding (IP67 Rated / Sealed with SWS)

- Mating Female Counterpart Shroud: Pairs seamlessly with Sumitomo 3-way female socket plug 6195-0009

- Associated Terminals & Seals: Fits standard Sumitomo DL series contacts (e.g., 8230-4472, 1500-0159) and wire seals (e.g., 7165-0118, 7165-0210)

- Commercial Access: Tiered B2B wholesale trade volume pricing breaks apply instantly inside your basket for independent tuning garages, fleet service hubs, and trade auto-electrical stockists.

DL sealed series

Housing Inline

2.3mm (090)

Sealed/Unsealed sealed

Male/Female M

Way 3

Mating parts 6195-0009 (DL sealed series)

Materials PBT or Low water absorption Nylon

Colour Dark Gray

We ship worldwide daily, and you can pay safely with PayPal