Original Yazaki 7287-8211-30

Terminals and seals are not included

The Component: Genuine Yazaki 7287-8211-30 (Alternative reference: 7287821130). 2-Way female automotive sealed connector housing for female socket receptacle contacts (Black).

Series Taxonomy: Yazaki 375 (9.5mm) Heavy Duty Sealed Series. A specialized, high-current power distribution interconnect platform engineered by Yazaki to manage intensive electrical loads, eliminate voltage bottlenecks, and safely route massive current across critical vehicle networks in harsh, moisture-prone environments.

Terminal Interface: 2-pin single-row inline cavity layout featuring a massive 9.5mm (375 size) blade receptacle profile, configured explicitly to house heavy-duty Yazaki female socket contacts running large-diameter automotive cabling.

Locking and Sealing Security: Environmentally sealed to a high-performance waterproof and dustproof automotive classification, engineered to operate flawlessly across a continuous temperature threshold certified from -40 to +85 degrees Celsius. Utilizes an integrated internal silicone perimeter sealing ring combined with heavy-gauge rear wire insulation seals to protect active high-amperage lines from water ingress, road spray, and short-circuit tracking. Mating retention relies on an integrated, heavy-duty top-mounted mechanical locking arm that clicks firmly into place over the mating plug ridge to resist punishing chassis vibrations and continuous engine harmonics.

Mating Complement: Connects inline wire-to-wire or wire-to-device by mating directly onto its corresponding 2-way male 9.5mm tab mating plug housing or device pin shroud assembly under the compatible Yazaki 375 sealed series.

Common Applications: Extensively specified across global passenger car, light commercial, heavy transport, and industrial machinery networks, most prominently within Japanese vehicle platforms utilizing high-draw auxiliary infrastructure. Most frequently deployed as the primary wiring harness connector for high-output engine cooling fans, interior cabin climate blower motor assemblies, main auxiliary relay blocks, glow plug circuits, and central power accessory hubs. Highly vulnerable to exterior locking arm breakage, housing distortion from excessive terminal crimp tension, or localized heat degradation if subjected to long-term circuit overload from a failing fan motor or corroded wiring joints.

Yazaki 7287-8211-30 375 Series 2-Way Sealed Female High-Current Power Plug Housing

Manage intensive electrical loads, eliminate voltage bottlenecks, and safely route heavy current across critical vehicle networks with the genuine Yazaki 7287-8211-30 2-way female automotive sealed connector housing. Precision-manufactured to strict Tier-1 original equipment global automotive engineering parameters by Yazaki, this heavy-duty 2-pin 9.5mm contact carrier block is an indispensable component for executing professional wiring loom repairs, high-amp pigtail fabrications, and clean electrical system overhauls. Designed with a rugged single-row inline matrix optimized around the massive 375 blade footprint, it establishes an exceptionally stable, ultra-low resistance link that safely carries continuous high-amperage power demands without risking localized thermal tracking or plastic housing collapse.

The 7287-8211-30 carrier housing is injection-molded from a premium, glass-fiber reinforced Polybutylene Terephthalate (PBT-GF15) compound finished in a factory black profile, ensuring outstanding structural impact defense, superior dimensional stability under high load, and absolute immunity to common automotive chemical degradation from engine oils, fuel vapors, and environmental road salt spray. Working in absolute uniformity with its internal silicone compression seals and heavy-gauge single wire seals (such as 7158-3035 or 7157-3580-60), it forms an impenetrable shield that completely blocks ambient moisture, road grime, and abrasive dirt from invading the internal contact lanes. This authentic component allows independent auto-electrical trade specialists, fleet service hubs, and custom motorsport builders to deliver reliable, factory-correct wiring restorations.

Engineering Specifications and Technical Attributes:

- Manufacturer Part Number: 7287-8211-30 (Brand: Yazaki / Japan)

- Auto-Click Core System Identifier: Our Part Number 2-AC690 (Verified Stock Class)

- Configuration: 2-Way Female Receptacle Housing, Single-Row Inline Power Layout

- Product Series Taxonomy: 375 / 9.5mm Sealed Series Interconnect Class

- Component Physical Dimensions: Overall Width 41.90mm, Length 56.00mm, Height 34.20mm

- Target Terminal Interface: Accepts standard 9.5mm / 375 size female socket contacts (e.g., Yazaki 7116-3250 series for 5.0mm² to 8.0mm² wire)

- Base Structural Compound: Premium High-Temperature Glass-Filled PBT-GF15

- Temperature Performance Envelope: Continuous operational range from -40 to +85 degrees Celsius

- Structural Weight Metric: 23.50 Grams nominal mass profile

- Commercial Access: Tiered B2B wholesale trade volume pricing breaks apply instantly inside your basket for independent tuning garages, fleet service hubs, and trade auto-electrical stockists. Cavity Family: 375

Colour (Component): Black

Dim-X/D (Width or Diameter) (mm): 41.9

Dim-Y (Length) (mm): 56

Dim-Z (Height) (mm): 34.2

Gender: Female

Hybrid Poles: NO

Locking: Top/Standard

Material: PBT GF15

Number of Poles: 2

Rows: 1

Sealed: Sealed

Size: 9.5

Temperature Max (°C): 85

Temperature Min (°C): -40

Weight/UOM [g]: 23.5

We ship worldwide daily, and you can pay safely with PayPal