Original Yazaki 7283-2918-10

Terminals and seals are not included

The Component: Genuine Yazaki 7283-2918-10. 2-Way female automotive high-current connector plug housing for female socket receptacle contacts (Dark Gray / Light Gray).

Series Taxonomy: Yazaki YPT 9.5WP High-Current Sealed Series. A specialized, ultra-robust Japanese automotive heavy-power interconnect platform engineered by Yazaki to deliver total environmental isolation and handle immense current loads exceeding 100A at 80°C across severe vehicle operating zones.

Terminal Interface: 2-pin single-row inline cavity layout configured explicitly to accommodate massive 9.5mm wide YPT series heavy-duty flat female blade socket contacts, accepting heavy-gauge wire cross-sections up to 16.0mm².

Locking and Sealing Security: Environmentally sealed to a high-performance waterproof and dustproof standard. Built with a continuous operational thermal ceiling certified from -40 to +125 degrees Celsius. Utilizes an integrated inner perimeter silicone compression matrix paired with specialized 2K single wire seals to provide absolute moisture isolation even when conductors are routed at tight, high-stress angles. Features a rigid, pre-staged primary terminal alignment block ensuring rock-solid Terminal Position Assurance (TPA) to prevent heavy-gauge wire back-out under severe axial vibration and chassis harmonics. Mating retention is governed by a heavy-duty top mechanical thumb-latch mechanism with optional Connector Position Assurance (CPA) tracks.

Mating Complement: Connects wire-to-wire or wire-to-device by mating directly onto its corresponding 2-way male high-power header, device shroud, or matching male tab inline housing configuration.

Common Applications: Extensively specified across prominent global passenger car, hybrid/electric vehicle (EV), and heavy commercial fleet networks, most notably within Toyota, Lexus, Hino, and Nissan platforms. Most frequently deployed inside high-current vehicle networks, including auxiliary cabin heater lines, high-amperage alternator charging feeds, main battery distribution loops, custom high-power trailer link modules, and primary fuse relay junction links. Highly vulnerable to exterior locking arm fracturing, thumb-latch snapping, or casing fatigue if forced with non-calibrated panel tools during heavy engine overhauls or battery management service teardowns.

Yazaki 7283-2918-10 YPT 9.5WP Series 2-Way Sealed Female High-Current Power Plug Housing

Restore flawless high-current power distribution, clear persistent high-voltage circuit fault codes, and reinstate maximum factory-correct environmental insulation within your vehicle's main distribution loom with the genuine Yazaki 7283-2918-10 2-way female sealed power connector housing. Precision-manufactured to strict Tier-1 original equipment global engineering parameters by Yazaki, this 2-pin YPT 9.5WP series socket block is an indispensable component for executing safe, long-term high-amperage automotive harness repairs and custom heavy-duty wiring overhauls. Designed with an oversized single-row inline cavity matrix optimized for the 9.5mm terminal footprint, it establishes an exceptionally stable, ultra-low resistance connection path that safely manages loads over 100 amps without risking localized thermal tracking or current transmission loss.

The 7283-2918-10 carrier block is injection-molded from a premium, glass-fiber reinforced Polybutylene Terephthalate (PBT-GF) compound finished in a factory gray profile, ensuring outstanding structural impact defense, superior dimensional stability under high torque, and absolute immunity to automotive fluid degradation from engine oils, hydraulic fluids, and environmental road salt spray. Working in absolute uniformity with internal silicone compression seals and heavy-gauge wire seals (such as 7158-3672-50 or 7158-3034-50), it forms an impenetrable shield that completely blocks ambient moisture, road spray, grime, and abrasive dust from tracking into the active terminal lanes. This authentic replacement component allows independent auto-electrical trade specialists, fleet service hubs, and custom EV modifiers to deliver reliable, factory-correct wiring overhauls.

Engineering Specifications and Technical Attributes:

- Manufacturer Part Number: 7283-2918-10 (Brand: Yazaki / Japan)

- Configuration: 2-Way Female Receptacle Housing, Single-Row Inline Power Layout

- Product Series Taxonomy: YPT 9.5WP High-Current Sealed Interconnect Class

- Contact Interface Size: Accommodates large-gauge 9.5mm wide female power socket contacts (e.g., 7116-3250, 7116-3251, 7116-5626-06)

- Component Housing Dimensions: Overall Length 50.55mm, Width 35.50mm, Height 29.55mm

- Base Structural Compound: Premium High-Temperature Glass-Fiber Reinforced PBT-GF

- Sealing Classification & Amp Rating: Waterproof Protection for Large-Current / High-Power Class circuits

- Operating Temperature Envelope: Robust -40 to +125 degrees Celsius capability

- Primary Structural Companion: Connects directly with corresponding 2-pole male YPT series mating interface options

- Associated Sealing System: Integrates with YPT single wire seals (e.g., 7158-3672-50, 7158-3034-50, 7158-3266-50)

- Commercial Access: Tiered B2B wholesale trade volume pricing breaks apply instantly inside your basket for independent tuning garages, fleet service hubs, and trade auto-electrical stockists.

We ship Worldwide daily and you can buy online safely using PayPal

We are the UK's largest specialist stockist of Automotive Connectors, and we offer low cost shipping to all Countries, fast and safe.