Hirschmann 872-863-562 SealStar 1.2 2-Way Male Sealed Plug

Includes terminals and seals

The Component: Genuine Hirschmann 872-863-562 2-way male automotive sealed connector housing. SealStar 1.2mm Series (2way 1.2 SealStar MB Connector) 2-position male tab casing (Natural / PA GF / Single-Wire Sealed / Mechanical Keying Code B).

Series Taxonomy: Hirschmann SealStar 1.2mm Sealed Series System. A premium, high-integrity German automotive interconnect platform engineered by Hirschmann to support structural miniaturization. Developed to deliver uncompromising waterproof defense, high thermal threshold capacity, and flawless signal performance under extreme automotive vibration profiles.

Connector Interface: 2-position (2-way) single-row male terminal housing plug configuration designed explicitly to hold male tab pin contacts. Features a compact 4.00mm centerline pitch matrix optimized for 1.2mm wide automotive flat terminal blade profiles.

Locking and Sealing Security: Environmentally sealed to a strict IPX9K high-pressure washdown classification, designed to perform continuously within a severe automotive temperature threshold certified from -40 to +150 degrees Celsius. Equipped with a high-reliability integrated Terminal Positioning Assurance (TPA) lock mechanism to guarantee perfect contact seating and completely eliminate the risk of pin back-out under heavy axial wire harness pulling. Utilizes rear single-wire insulation seals (SWS) at a 180-degree straight cable exit angle to construct an absolute water-tight barrier that actively blocks road spray, washdown fluids, and atmospheric moisture tracking.

Mating Complement: Connects inline wire-to-wire or wire-to-device by clicking directly into its corresponding 2-way female inline socket partner housing assembly under Hirschmann part number 805-120-522, or matching Code B female receptacle interfaces from the Hirschmann SealStar 1.2 platform.

Common Applications: Extensively specified as a factory original equipment (OE) mainstay across prominent European passenger car networks, luxury transport platforms, and motorsport wiring architectures, most prominently within BMW, Mercedes-Benz, Volkswagen Audi Group (VAG), and Porsche vehicles. Universally recognized across the auto-electrical trade as the primary inline male mating plug for high-vibration safety and powertrain networks, including airbag modules, chassis impact crash sensors, camshaft adjusters, fuel pump modules, and low-voltage engine compartment sensor links. Highly vulnerable to internal alignment channel fracture or locking tab distortion if pried open roughly with uncalibrated field service diagnostic tools during routine harness modifications or vehicle rebuilds.

Hirschmann 872-863-562 SealStar 1.2 Series 2-Way Sealed Male Sensor & Safety Module Plug Housing

Clear persistent dashboard warning faults, complete an uncompromised inline wiring extension, and reinstate maximum factory-standard environmental insulation at your vehicle's safety or powertrain circuits with the genuine Hirschmann 872-863-562 2-way male sealed connector housing. Precision-molded from heat-stabilized, glass-fiber reinforced Polyamide (PA GF) to strict original equipment global engineering guidelines by Hirschmann, this SealStar 1.2 series male tab carrier block is an indispensable trade piece for executing professional sensor pigtail repairs, custom motorsport loom sectioning, and clean auto-electrical overhauls. Engineered explicitly to survive punishing dynamic forces near the engine block, transmission, and chassis, it establishes a solid, zero-clearance conduction channel that safely routes critical logic data lines, signal loops, and low-voltage current paths.

The 872-863-562 carrier housing features a 2-pole matrix layout optimized around the 1.2mm terminal footprint, handling thin-wall automotive cabling cleanly. Its distinct factory natural/off-white shroud profile features Code B mechanical keying to ensure perfect alignment during assembly, preventing dangerous mis-mating errors on complex multi-sensor harness junctions. Working in absolute uniformity with its internal perimeter radial seals and rear silicone single wire insulation seals, it forms an impenetrable barrier that completely locks out road spray, hot engine oil vapors, ambient grime, washdown fluid, and abrasive dirt from tracking into the active terminal lanes. This authentic component allows independent auto-electrical trade specialists, diagnostic garages, and custom vehicle restoration engineers to deliver reliable, factory-correct wiring overhauls.

Engineering Specifications and Technical Attributes:

- Manufacturer Part Number: 872-863-562 (Brand: Hirschmann / Germany Genuine Class)

- Auto-Click Core System Identifier: Our Part Number 2-AC085 (Verified Stock Allocation)

- Configuration: 2-Way Male Tab Housing, Single-Row Inline Layout

- Product Series Taxonomy: SealStar 1.2mm / Low Pole Sealed Interconnect Class

- Component Product Name Alias: 2way 1.2 SealStar MB Connector (Keying Code B)

- Centerline Pitch Matrix: Tight 4.00mm Pitch spacing

- Target Terminal Interface: Accepts standard 1.2mm width male tab flat pin contacts

- Cable Exit Angle Profile: 180-Degree Straight Exit configuration

- Terminal Position Assurance: Yes (Integrated TPA Secondary Lock)

- Connector Position Assurance (CPA): No (CPA lock is integrated on the mating female counterpart)

- Base Structural Compound: Premium High-Temperature Glass-Filled Polyamide (PA GF)

- Environment Profile: Waterproof / Dustproof High-Pressure Weatherproof Shielding (IPX9K Rated / Sealed with SWS)

- Engineering Design Guidelines: Fully compliant with German automotive LV-214 specification metrics

- Operating Temperature Envelope: Extended -40 to +150 degrees Celsius capability

- Mating Female Counterpart Shroud: Pairs seamlessly with Hirschmann 2-way Code B female receptacle plug 805-120-522

- Commercial Access: Tiered B2B wholesale trade volume pricing breaks apply instantly inside your basket for independent tuning garages, fleet service hubs, and trade auto-electrical stockists.

Connector Type:Housing for male terminals

Terminal Type:1.2 MM

Number of Ways:2

Connector Positioning Assur.:No

Protective Shroud Twisted:No

Operating Temperature Range:-40 °C - 150 °C

Terminal Positioning Assurance: Yes

Pitch: at 1.2 mm = 4 mm

Colour: Nature

Coding: B

Tightness Classification:IPX9K

Cable Exit Angle:180 °

Sealed: Yes, with single wire seals

Guideline:LV-214

Housing Material: PA GF

We ship worldwide daily, and you can pay safely with PayPal