1-1419168-1
· TE CONNECTIVITY · Our Part Number: 6-AC055 ·
1-1419168-1
Terminals are included
The Component: Genuine TE Connectivity 1-1419168-1 (Alias Number: V23542-G1506-D101). 6-Way female sealed automotive connector receptacle housing for socket contacts (Black / Keying Code A).
Series Taxonomy: TE Connectivity GET .64 Connector System. A high-density, ultra-compact global automotive interconnect platform engineered to deliver premium weatherproof micro-signal routing and rock-solid terminal retention under extreme under-hood vibration and elevated temperature cycles.
Terminal Interface: 6-pin single-row inline cavity layout featuring a tight 2.54mm pitch centerline spacing, configured explicitly to house high-performance GET .64 female receptacle socket contacts.
Locking and Sealing Security: Environmentally sealed to an IP67 rating with an elite continuous operational temperature threshold certified from -40 up to +145 degrees Celsius. Relies on a pre-assembled, integrated silicone matte peripheral wire seal to isolate internal pathways, backed by a robust secondary locking mechanism ensuring absolute Terminal Position Assurance (TPA) to prevent micro-pin back-out under severe axial wiring strain.
Mating Complement: Connects inline wire-to-wire or wire-to-device by mating directly onto its corresponding 6-way male tab header housing under TE Connectivity part number 1-1419168-2.
Common Applications: Extensively specified across major global passenger vehicle networks, most prominently within Ford Motor Company, General Motors (GM), and Fiat Chrysler/Stellantis factory platforms. Most frequently deployed as the primary, high-exposure factory wire harness side repair pigtail for Drive-By-Wire (DBW) electronic throttle body assemblies, accelerator pedal position sensors (APP), and compact engine management control nodes. Highly vulnerable to exterior release latch snapping, alignment channel tracking wear, or shell fracturing when subjected to extended under-hood thermal cycles and aggressive field diagnostic manipulation.
TE Connectivity 1-1419168-1 GET .64 Series 6-Way Sealed Female Electronic Throttle Body Plug Housing
Eliminate intermittent micro-signal dropouts, clear persistent limp-mode diagnostic trouble codes, and reinstate maximum weatherproof insulation inside your vehicle's engine bay loom with the genuine TE Connectivity 1-1419168-1 6-way female sealed connector plug housing. Precision-manufactured to strict Tier-1 original equipment global automotive engineering standards by TE Connectivity, this 6-pin GET .64 series receptacle carrier block is an indispensable piece for executing professional throttle pigtail fabrication and wiring restoration. Designed with a robust single-row inline matrix optimized around the sub-millimeter contact footprint, it establishes a solid, zero-resistance electrical transition channel that safely manages delicate sensor telemetry loops without risking localized resistance scaling.
The 1-1419168-1 carrier housing is injection-molded from a premium, 35% glass-filled heat-stabilized polyamide (PA66 GF35) compound finished in a factory black profile, ensuring exceptional impact defense, outstanding dimensional stability, and complete immunity to chemical degradation from engine oils, fuel vapors, and hot coolant spray. Working in absolute uniformity with its internal silicone compression perimeter seal and pre-staged matte sealing grid, it constructs an impenetrable barrier that isolates raw signal lines from moisture tracking, heavy road grime, and abrasive dirt. Precision-molded Key A polarization paths ensure immediate, error-free alignment with the matching male device header or inline cap. This authentic replacement component allows independent auto-electrical trade specialists, diagnostic garages, and custom loom builders to deliver traceable, factory-correct wiring restorations.
Engineering Specifications and Technical Attributes:
- Manufacturer Part Number: 1-1419168-1 (Brand: TE Connectivity / AMP)
- Engineering Cross-Reference Designation: V23542-G1506-D101 (GET Series Profile)
- Configuration: 6-Way Female Receptacle Housing, Single-Row Inline Matrix Layout
- Product Series Taxonomy: GET .64 Sealed Interconnect System Class
- Centerline Pitch Spacing: Compact 2.54mm (0.100 inch) layout
- Target Terminal Interface: Accepts TE GET .64 female socket contacts (e.g., 1393366-1 Tin, 1393365-1 Gold)
- Base Structural Material: Premium High-Temperature Glass-Filled Polyamide (PA66 GF35)
- Sealing Classification & Envelope: Waterproof IP67 Protection rated up to an elite +145 degrees Celsius
- Primary Structural Companion: Mates directly with male tab housing part number 1-1419168-2
- Commercial Access: Tiered B2B wholesale trade volume pricing breaks apply instantly inside your basket for independent tuning garages, fleet service hubs, and trade auto-electrical stockists.
6 Way Automotive Connector
TE Internal #: 1-1419168-1
TE Internal Description: MARKET 1X6 FEMALE SEALED
Alias #: V23542-G1506-D101